Fixed Window

Fixed Window

Architectural grade product made of extruded aluminum in minimum 6063-T6/T54 alloy with polyamide thermal break. Assembled by rolling and crimping with a minimum 400 kg shear test. Typically used for fixed window application without sashes.

This product is designed as a pressure-balanced rain screen with a pressure equalization chamber to prevent water infiltration.

Vertical structural members are available in different widths, 25mm (1″), 41mm (1 ½”) and 64mm (2 ½”) depending on the structural or architectural needs of the project.

Available frame depths:
  • 3″ (75 mm) – 8530 Series
  • 4″ (100 mm) – 8540 Series
  • 6″ (150 mm) – 8560 Series
Glazing

This window allows the installation of double or triple sealed units.

Insulated Glass Unit (IGU) options: 25mm (1”), 32mm (1 ¼”) and 38mm (1 ½”).

Specification of the glass or a spandrel panel at the professional’s choice

All sealed units are installed from the inside with a mechanical snap-in air barrier and water barrier moulding.

Air and water tightness is ensured by dry seals in co-extruded polypro / Santoprene, EPDM or silicone depending on their function and position in the system.

Technical performance

Primary product designation :

AW – PG125 – type FW

Air infiltration/exfiltration :

FIXED level

Maximum 0,2 l/s-m2 @ 300 Pa

In accordance with AAMA/WDMA/CSA 101/i.S.2/A-440-11 (9.3.2), A-440S1-17, ASTM-E283-04

Water resistance test :

  • No water infiltration at 730 Pa

In accordance with AAMA/WDMA/CSA 101/i.S.2/A-440-11 (9.3.3), ASTM-E547, ASTM-E331

Uniform load deflexion :

Deflexion limited to L/175

Achieved product level at 6000 Pa (125 psf) on a 1830 x 2760 mm (72 x 109 in.) specimen

In accordance with AAMA/WDMA/CSA 101/i.S.2/A-440-11 (9.3.4), ASTM-E330-02

Forced entry resistance :

Grade 10

In accordance with AAMA/WDMA/CSA 101/i.S.2/A-440-11 (9.3.5), ASTM-F588-07

U-value in accordance with NFRC 100.

Lessard.ws - 85WW1_

Have a project for us?

Scroll to Top