2000D Series Curtain Wall and 2000HP Series Curtain Wall

Structural aluminum mesh curtain wall for commercial applications

HP – superior thermal performance such as pool environments

Extruded aluminum curtain wall in 6063-T6 alloy minimum and 6061-T6 for unexposed structural elements. Usually used for low-rise building facades.

All seals are made of SILICONE or EPDM depending on their location and function in the system.

Insulated Glass Unit (IGU) options: 25mm (1”), 32mm (1 ¼”), 38mm (1 ½”).

The IGUs are installed from the outside with dried gaskets and can be held by pressure plates or by structural silicone.

Also available with high thermal performance pressure plates (MR200HP) for location with high-relative humidity.

Available frame depths :
  • 5mm x 44.5 (2 ½’’ x 1 ¾’’)
  • 5mm x 76.2 (2 ½’’ x 3’’)
  • 5mm x 114.3 (2 ½’’ x 4 ½’’)
  • 5mm x 139.7 (2 ½’’ x 5 ½’’)
  • 5mm x 174.6 (2 ½’’ x 6 7/8’’)
  • 5mm x 228.6 (2 ½’’ x 9’’)

Several aesthetic caps and features are available to enhance the building design.

Technical performance

Primary product designation :

Curtain Wall

(not covered by NAFS standards)

Air infiltration/exfiltration :

FIXED Level: Maximum 0,2 l/s-m2 @ 300 Pa

In accordance with ASTM-E283-04

Water resistance test :

No water infiltration at 700 Pa

In accordance with AAMA/WDMA/CSA 101/i.S.2/A-440-11, ASTM-E547, ASTM-E547

Uniform load deflexion :

Deflexion limited to L/175 at the pressure determined by the current code

In accordance with AAMA/WDMA/CSA 101/i.S.2/A-440-11, ASTM-E330-02

Forced entry resistance :

Grade 00

In accordance with AAMA/WDMA/CSA 101/i.S.2/A-440-11 (9.3.5), ASTM-F588-07

U-value in accordance with NFRC 100.

Have a project for us?

Scroll to Top